High-density Polyethylene
Brand: Polystone® G — Röchling
Standards: ISO 1872, ASTM D4976
PE-HD (High-density Polyethylene, PE 300) is a cost-effective engineering plastic with good chemical resistance and moderate mechanical properties. Widely used for tanks, containers, cutting boards, and chemical equipment. Excellent resistance to most acids and bases.
Guideline values from manufacturer datasheet. Actual values may vary by grade and dimensions.
| Property | Value | Unit |
|---|---|---|
| Density | 0.96 | g/cm³ |
| Tensile Strength (Yield) | 22 | MPa |
| Elongation at Break | >50 | % |
| Tensile Modulus (E) | 1000 | MPa |
| Shore Hardness | 63 | Scale D |
| Service Temp. Long-term | -50 … 80 | °C |
| Service Temp. Short-term | 100 | °C |
| Melting Temperature | 135 | °C |
| Water Absorption | <0.01 | % |
| Flammability (UL94) | HB |
Disclaimer: The technical data and information provided on this page are for reference and general guidance purposes only. They are based on manufacturer datasheets and standard testing conditions. Material properties can vary depending on dimensions, machining, and specific application environments. MaterialCut does not guarantee the accuracy of this data for specific use cases. For exact specifications and critical applications, please consult the original manufacturer datasheets or contact our technical team.
