Carbon Fibre Reinforced Epoxy (CFRP)
Brand: DragonPlate — DragonPlate, Torayca® — Toray, Tenax® — Teijin Carbon, Sigrafil® — SGL Carbon
Standards: ISO 14125, ASTM D3039
CFRP (Carbon Fibre Reinforced Polymer) sheets offer the highest specific stiffness and strength of any engineering material — tensile strength up to 1200 MPa at density of only 1.55 g/cm³. Used in aerospace, motorsport, robotics and high-performance structural applications where weight reduction is critical. Waterjet cutting is preferred to avoid delamination. Note: carbon fibre dust is an irritant — use appropriate PPE during machining.
Guideline values from manufacturer datasheet. Actual values may vary by grade and dimensions.
| Property | Value | Unit |
|---|---|---|
| Density | 1.55 | g/cm³ |
| Tensile Strength (Yield) | 1200 | MPa |
| Elongation at Break | 1.5 | % |
| Tensile Modulus (E) | 70000 | MPa |
| Service Temp. Long-term | -50 … 120 | °C |
| Water Absorption | 0.1 | % |
| Flammability (UL94) | HB |
Disclaimer: The technical data and information provided on this page are for reference and general guidance purposes only. They are based on manufacturer datasheets and standard testing conditions. Material properties can vary depending on dimensions, machining, and specific application environments. MaterialCut does not guarantee the accuracy of this data for specific use cases. For exact specifications and critical applications, please consult the original manufacturer datasheets or contact our technical team.
