Polyamide 6 (Cast, Oil and MoS₂ filled)
Brand: Sustamid® 6G MO — Röchling, Nylatron® GSM — MCAM, Ertalon® 6 MO — MCAM
Standards: ISO 1874
PA 6 MO (Oil and MoS₂-filled Cast Polyamide 6) combines the structural properties of cast nylon with internal solid lubrication. The MoS₂ filler significantly reduces the coefficient of friction and improves wear resistance compared to unfilled PA 6 G. Ideal for gears, bearings, bushings and sliding guides operating without external lubrication. The black colour is characteristic of the MoS₂ filler.
Guideline values from manufacturer datasheet. Actual values may vary by grade and dimensions.
| Property | Value | Unit |
|---|---|---|
| Density | 1.15 | g/cm³ |
| Tensile Strength (Yield) | 82 | MPa |
| Elongation at Break | 35 | % |
| Tensile Modulus (E) | 3500 | MPa |
| Shore Hardness | 82 | Scale D |
| Service Temp. Long-term | -40 … 105 | °C |
| Melting Temperature | 216 | °C |
| Water Absorption | 3.0 | % |
| Flammability (UL94) | HB |
Disclaimer: The technical data and information provided on this page are for reference and general guidance purposes only. They are based on manufacturer datasheets and standard testing conditions. Material properties can vary depending on dimensions, machining, and specific application environments. MaterialCut does not guarantee the accuracy of this data for specific use cases. For exact specifications and critical applications, please consult the original manufacturer datasheets or contact our technical team.
