High Density Polyethylene (Antistatic)
Standards: ISO 11542
PE 300 AST (Antistatic High Density Polyethylene) combines the chemical resistance and low friction of PE-HD with antistatic properties. Surface resistivity 10⁶–10⁹ Ω — suitable for ESD-sensitive environments and ATEX zones.
Brand name: Polystone® G AST (Röchling).
For electrically conductive version (≤10⁶ Ω), contact us. For higher wear resistance, see PE 1000 AST.
⚠️ Technical data are typical values. Always verify with the manufacturer for critical applications.
Guideline values from manufacturer datasheet. Actual values may vary by grade and dimensions.
| Property | Value | Unit |
|---|---|---|
| Density | 0.97 | g/cm³ |
| Tensile Strength (Yield) | 22 | MPa |
| Shore Hardness | 64 | Scale D |
| Service Temp. Long-term | -50 … 80 | °C |
| Water Absorption | 0.01 | % |
| Flammability (UL94) | HB |
Disclaimer: The technical data and information provided on this page are for reference and general guidance purposes only. They are based on manufacturer datasheets and standard testing conditions. Material properties can vary depending on dimensions, machining, and specific application environments. MaterialCut does not guarantee the accuracy of this data for specific use cases. For exact specifications and critical applications, please consult the original manufacturer datasheets or contact our technical team.
